What is a Gooseneck Hitch? How To Install a Gooseneck Hitch?

Disclaimer: We may earn a small commission from sponsored links in this article at no additional cost to you.

Last Updated on July 4, 2022

Pickups are indeed super powerful. Today we love the concept of a pickup for towing especially. However, without the object that helps to hook the trailer, everything would not be that smooth or simple. 

And when talking about gooseneck hitches, it becomes obvious, the one popular right now for larger and heavier tower trailers.

What is a gooseneck hitch? How to install a gooseneck hitch? The factors that are important to keep in mind? And also, about the gooseneck hitch installation cost. Let’s find out all of that today!

What Is a Gooseneck Hitch?

First and foremost, you need a short introduction to exactly what a gooseneck hitch is. It’s almost similar to any conventional hitch. 

Here you’ll see a ball fitted to the truck bed. And also, there’s the round receiver with trailer tongue. However, the ball hitch here is a bit larger compared to conventional ones. The hole in the truck bed holds the ball.

Here’s How to Install a Gooseneck Hitch

How to install gooseneck hitch

Let’s get into the actual process of installation for this gooseneck hitch.

1. You Have To Mark The Center of Hitch Ball

This is exactly the spot that gets mounted to the truck bed’s inside, you have to mark it beforehand. However, make sure that the ball is centering exactly between the bed rails. Also, it should be situated in front of the rear axle of the vehicle.

There should be a little clearance available for the gooseneck trailer to easily turn. That’s why you should measure the ball placement and make sure of it. Also, have a look underneath the truck. You want to make sure that there’s no obstacle in the drilling location. There might be some components beneath the truck bed.

2. Make a Cut

You’ll need a 3.5-inch hole saw at this point. Use it for cutting through the marking point you just made in the truck bed. Don’t forget to file through the hole edges. So that any roughness is gone as you make this cut.

3. Next Comes Proper Placement

You want to place the hitch platform from the beneath of the truck into the hole that you drilled. 

This platform will just work as a template so that you can create the holes necessary for the hex bolts installation. In some cases, you might need to use U-bolts or even carriage bolts.

Use a cordless drill and make the hole using a 5/8-inch drill bit. For U-bolts in the stallion, you need to drill holes on each location of ¾ inch size.

4. Securing The Bolts to Complete the Installation

  • Next, you want to insert the hex bolts of 5/8-inch size as well as the carriage bolts into the platform of the hitch. You should do this from the bed’s top side. So that the platform pattern that was indicated is followed.
  • Use a lock washer and nut to secure these bolts from the truck bed’s underneath. You want to apply torque to the bolts to 150 ft/pounds.
  • From the top side of the bed, you want to slide both U-bolts into a drilled hole of ¾ inch size. On each U-bolts extension, don’t forget to slip a spring. And basically, use the nut and lock washer from the truck bed underneath to score the whole assembly in spot.
  • There should be a ball hitch screw on the gooseneck ball hitch’s top area, unscrew it. You won’t slide the ball from the truck bed’s topside through the platform of the gooseneck hitch. Retighten the screw on the ball top and secure everything completely.

And That’s it!

A Few Things to Keep in Mind For Gooseneck Hitch Installation

  1. Make sure to work with the sweet spot for placing the gooseneck hitch. The placement must allow enough clearance of making turns.
  2. With installing a gooseneck hitch, modifications could be necessary and you should have a prior idea of it. One example is the matter of getting a hitch ball connected with the frame. That may require a hole made right in the middle of the truck bed, which should drill.
  3. You are going to need a few tools for installing the hitch along with enough confidence to tackle the job. If you are not that Lexile with your automotive skills, it’s best to not take any risk and hire a professional. This becomes even more important if you need to get the automatic brake control system installed for the hitch as well.
  4. Taking measurements before hooking up is necessary. You see, the installation isn’t a universal thing. And so, the specific placement could be different from vehicle to vehicle.

Frequently Asked Questions

How does the gooseneck hitch work?

If you pay attention to the process of installing the gooseneck hitch, you’ll know there’s a ball that connects with the gooseneck trailer’s vertical coupler to work.

What is the difference between a fifth-wheel hitch and a gooseneck hitch?

Ball hitches that attach within the truck bed are gooseneck hitches. On the other hand, hitches that have tow truck bed sorting hinged plates, are known as fifth wheel hitches.

What is the cost to install a gooseneck hitch?

You are going to require a High capacity gooseneck hitch installation kit. And then the installation shall cost you somewhere between 900 to 2700 dollars on average.

Wrapping Up

So now you know what is a gooseneck hitch, how to install gooseneck hitch and quite a few crucial relevant matters. We tried to give you a brief but comprehensive enough idea on this matter. 

Hopefully, it was helpful. On that note, we’ll be leaving for today wishing you’d join us in our new article as well. Take Care!

You can also check our other guides & reviews on hitches.

About the Author: Brian Silvestro

Brian Silvestro is the founder and chief editor of OffroadersArena. He spends his free time tending to his BMW iX SUV and explaining its merits to anyone who'll listen.

Leave a Comment