How To Install A Trailer Hitch On Toyota Tacoma

Disclaimer: We may earn a small commission from sponsored links in this article at no additional cost to you.

Last Updated on July 31, 2022

There’s no doubt that the Toyota Tacoma has an impressive towing capacity. You can easily tow a heavy load with your Tacoma by installing a trailer hitch. So if you need to tow something big, don’t hesitate to put your Tacoma to the test.

If you’re new to installing trailer hitches on your Tacoma, it’s perfectly normal to feel a bit uncomfortable. There’s no need to worry, though.

In this guide, I will be telling you the steps you need to follow to install a trailer hitch on your Toyota Tacoma. Let’s dive into the core section.

How To Install A Trailer Hitch On Toyota Tacoma

Steps To Install A Trailer Hitch On A Toyota Tacoma

Step 1: Inspecting your Toyota Tacoma

Your first step towards installing a hitch will be inspecting your Toyota Tacoma. You should check if the Tacoma area where you will install your hitch is in good condition or not. If there is any corrosion or damage, then it can cause an accident.

Without it, make sure that the hitch you brought is the right one for your Tacoma. Not all hitches may fit on your vehicle. In order to find the right hitch, you can check the instruction manual of your Tacoma. You will find all the necessary information there. In case you don’t have the manual with you, you can consider calling Toyota Tacoma customer care. Usually, the hitch that can tow up to 3500 lbs weight is considered as the perfect one for a Toyota Tacoma.

Step 2: Bring the necessary tools

After that, you have to bring the necessary tools. Before you start installing the hitch, make sure that you have the tools in your hand. The tools you will need are:

  • Socket set – the basic wrench set where there will be at least 3/4-inch and 19 mm sockets.
  • Standard wrenches – the basic wrench collection of both metric and standard size. There should be a large wrench of 3/4-inch and 19 mm on hand.
  • Specialty wrenches – an air impact wrench and a torque wrench. You may not need to use them. But you will find things handy when you have these tools.

Step 3: Get your Toyota Tacoma ready

You have to pay attention to your comfort and safety. For this, there should be enough space underneath your Tacoma while installing a trailer hitch. As it is not possible to install the hitch when your Tacoma is on the ground, you need to use a jack to elevate your vehicle. For safety and stability, you should use jack stands.

Besides, you have to find pre-drilled holes where you are going to install the hitch. Also, pay attention that you don’t need to move the bumper or spare tire or any other component for accessing the bolt holes.

Step 4: Assembling and attaching the hitch

Now, have a quick look at the instruction manual that comes with your hitch. Move the hitch in its place below the Tacoma to assess fit and you will not lose any parts. After that, attach your hitch to your Tacoma’s underside. The average weight of a hitch is between 40 and 50 lbs. That is why it is recommended to take help from anyone to lift the hitch in its place. In case you are doing the process alone, you can use a jack system for holding the hitch in its position. 

Then, make all the nuts and bolts of your hitch tighten. In order to find the required torque amount, you can check the instruction manual. Finally, install the hitch ball mount. You can pick a universal ball mount or any other ball according to your towing requirements. 

After installing the hitch on your Toyota Tacoma, you have to hook up the trailer. Give everything a double check. Don’t forget to check whether the rear and brake lights of your trailer are working properly as it is important for the safety on roads.

More Guides:

About the Author: Brian Silvestro

Brian Silvestro is the founder and chief editor of OffroadersArena. He spends his free time tending to his BMW iX SUV and explaining its merits to anyone who'll listen.

Leave a Comment