Having owned a winch, you would always want to get the best output out of it. You never know where you will be stuck, and more often than not, it would be during an ungodly hour at a place with no human traffic to feel safe around.
During those times, you would want to get out as soon as you possibly can. That means that you will want your winch to get you out of a situation with your stuck vehicle as soon as possible, which means your winch must be as efficient as possible.
There are ways to get the best from your winch and one of the most prolific ways would be to make it work as fast as possible.
Table of Contents
One can simply make a winch run faster by increasing its voltage. That is the most basic way to do so. You can test this by latching the winch onto a running truck and seeing how much the speed expands during that. This happens mainly because of the high risen voltage while charging.
Now, like any other thing around the world and in the laws of physics, we all know that the more strength something has, the better it can get its job done. And same goes for the mighty winch. More its pulling power, the faster it can get your vehicle out of the ditch.
Now there are certain ways you help make your winch pull with greater power than it already does. We will look into a few of them. Before we get into them, we should educate ourselves on what a snatch block is.
Snatch blocks, sometimes known as pulley blocks, are a sort of pulley. That is to say, it is something that is used for pulling jobs. A side plate on the snatch block swings opens over the pulley to allow the winch cable to pass through. This aids you by allowing you to simply thread your winch cable through the open without difficulty.
A snatch block primarily serves two purposes. If you have an offset anchor point, one of them can assist you in changing the cable’s direction. Second, the pulling power of your winch nearly doubles compared to normal.
The Straight Pull
If you have ever had to winch yourself out of a tight spot, you know that keeping a straight winch line isn’t always possible. If you do find yourself in this situation, a snatch block will assist you in keeping the line relatively straight.
Even if it appears impossible to keep the line straight, this is true. That means that no matter how bad the ditch or the fall is, you will be able to maintain a straight line of pull. Your winch will get additional power as a result of this straight pull.
To operate the mentioned straight pull, you will need to use the snatch block to produce more winch lines, which will make your operation move faster and more efficiently.
Single Line Wrap
The single-line wrap is another option to boost your winch’s pulling strength. The winch drum is wrapped in a single wrap of cable, as we all know. We also know (or should know) that one wrap increases weight-bearing efficiency by 10%.
According to the math, only 6000 pounds can be raised by 5 cable wraps on a 1000-pound winch. Using a snatch block, though, you can still enhance this. You must use a snatch block to rig your winch in such a way that it completes your task quickly.
Doubling your winch’s pull power
As we already know that snatch blocks can double the pulling power of your winch, let’s dive deeper to learn how exactly we can do so.
Firstly, make sure all your equipment is built for the extra power you intend to exert for more weight. Once you are sure that they are okay, then look for a tree to use as your anchor point. Then you will want to wrap your strap around that anchor point and tighten it.
After that, grab the winch cable and wrap it around the winch first. Then, spool the winch wire and carry it to your anchor point. At this point, check to see if your winch cable is in good working order. Instead of going through the bother of turning on the motor and checking, you can accomplish it simply by free spooling.
After you have placed your winch line, you will need to unlock your snatch block at that time. Because your goal is to double your winch’s pulling strength, you will notice that the winch line is moving quickly, especially if you want your winch to stay put.
You will see that your winch line is stretching that period of time. And the more lines you add to your winch, the more powerful it becomes.
Now that everything is in its proper place, you will need to connect the wire to the snatch block and hook it up. After then, you must return to the recovery location from where you will be pulling. The soft shackle will secure your vehicle’s front bumper. Start the engine after that.
To begin, apply pressure and tension to the winch line before returning to the snatch block. You must be aware of the winch line, which, like the straight pull, must be set in the middle. As a result of all of this, your snatch block will be able to quadruple the power of your winch.
Now I could imagine how all this seems very easy to do to make your life easier, but you must be very careful with the way you modify your winching. As it directly puts outside work on the winch throughout its way of doing the job, you must be mindful of whether your winch is actually up to the task or not.
Imagine breaking your winch only because you wanted to get out of a ditch faster than it would have taken normally, only creating more trouble. In any case, happy winching.