How to Use a Winch for Pool Cover

Disclaimer: We may earn a small commission from sponsored links in this article at no additional cost to you.

Last Updated on September 30, 2022

If you are a proud owner of a pool and reside in a country where winter lasts for a few months, then you cant avoid covering your pool. Basically, the cover is used in order to protect your pool from dirt, leaves, pollen and debris so that you find a clean pool when you uncover it.

A lot of people nowadays prefer covering their pool using a pool cover. However, still, some people hesitate to pick this method as they don’t know how to do that.

Trust me, using a winch for covering your pool will be a piece of cake and you can do this within a short period of time. You just need to know some process for this. That’s it. Also, ensure that you’re choosing the right type of winch for covering your pool.

Today, I will be talking about the ways or steps that you can follow to cover your pool using a winch. If you are having a problem with this task, spend here a few minutes. You will be able to do it for sure.

How to Use a Winch for Pool Cover

Why you should use a winch and cover your pool?

Before moving into the core section, I think you should know why you should cover your pool and why a winch to do that.

  • At first, you need to cover your pool for keeping it clean from debris. Using a pool cover will ensure that you will get a clean pool even if you don’t use it for a long time. It usually happens from the starting of winter to after the spring showers. 
  • Apart from that, using a pool cover has a long reputation for preventing accidental drowning and blocking sunlight. Your pool cover will do a fantastic job to keep your pool in good condition.

However, you will find that most of the pool cover comes along with winch-like cable tighteners. That’s why in order to complete the task, you need to know the right use of your winch.

3 Steps of Using a Winch to Cover Your Pool

Step 1: Winterizing the Pool

Before start covering the pool using a cover, you should prepare your pool first for the winter. For this, you should clean your pool first thoroughly. Then, make sure that you have disconnected the filtration systems and all pumps. Don’t forget to reduce the water level also.

The water level of your pool should be a minimum of 4 inches lower than the skimmer level. The water level is reduced to avoid overflowing issues. You will face the overflowing problem when you will go through the cover tightening process. However, when you will find the water level is at the desired level, you need to make sure the return and skimmer sittings are sealed properly.

Once you are done with this, you need to apply the necessary chemicals that are applied while closing the pool. These chemicals include pool winterize, rust protector, pool shock and other essential chemicals for preserving your pool integrity.

Step 2: Spread the Pool Cover Above the Pool Ground

In the second step, you need to spread your pool cover above your pool ground. This step is quite simple and self-explanatory. However, still there are some precautions you need to keep in mind while going through this step.

The cover you will be using for covering your pool should be larger than your pool. It should not be the accurate size of your pool. It is recommended to bring a cover that is 3 feet wider than your pool size. As a result, you will find that your pool top is covered totally and also there will be adequate materials hanging on the sides.

When you will be laying your pool cover, keep in mind that there should be evenly extra materials hanging at every side. This will help to make the winch tightening process easier.

Step 3: Secure the Pool Cover Using a Winch

Once you are done with placing the cover around the top of your pool, now you should secure it. In order to do that, you need to weave the cable through the holes you will see at each edge of your pool cover. Once you will find that the whole perimeter of your cover is laced with the rope, then you need to pull the rope for tightening it.

After that, you have to secure the ending part of your rope to the other side of the winch you will be using. Next, turn your winch slowly. You should not turn it in quickly as there is a chance of damaging the pool.

However, when you will tighten your cable, don’t forget to check whether it is tightened evenly all around the sides or not. Besides, you need to ensure that it is remaining below the rail of your pool. In this case, a portable winch will provide ease of your working.

Popular Guides:

About the Author: Brian Silvestro

Brian Silvestro is the founder and chief editor of OffroadersArena. He spends his free time tending to his BMW iX SUV and explaining its merits to anyone who'll listen.

Leave a Comment